See it at Dundalk LeisureCraft: Baltic Plunge
Dundalk LeisureCraft's own page for the Baltic Plunge. Not a paid link.
Baltic Plunge vs Model S1 Soak Series
Dundalk LeisureCraft Baltic Plunge and SaunaLife Model S1 Soak Series, compared on the figures their makers publish. These cold plunge tubs without a chiller hold amounts of water, by their makers' figures, within 30% of each other.
The makers' figures side by side
| Specification | Dundalk LeisureCraft Baltic Plunge | SaunaLife Model S1 Soak Series |
|---|---|---|
| Indoor or outdoor | outdoor | outdoor |
| Outside dimensions | Exterior Diameter 37.5″ 95 cm Exterior Height 43.75″ 110 cm | 40" Diameter x 41.3" |
| Inside dimensions | Interior Diameter 32″ 81 cm Interior Height 40.75″ 104 cm | 34.4” Diameter x 36” Deep |
| Weight | — | Net weight 143 lbs |
| Assembly | shipped assembled | Arrives fully assembled |
| Material | The tub is made with a plastic HDPE liner and stainless steel bands on the outside | Thick contoured fiberglass lining; Thermo-Pine materials |
| Water capacity | Interior Volume 132 Gallons 501 Litres | 124 Gallon water capacity |
| Warranty | All cold plunge packages come with a 5-year warranty (not including chiller). | service for two years for residential applications after delivery to the original retail purchaser |
Each figure is the maker's own, as cited row by row on the Baltic Plunge and Model S1 Soak Series pages and listed in the sources below. A dash means the figure is not on the maker pages we cite. Figures marked "about" are Saunakivi's unit conversions of the maker's figure.
Where to buy
Dundalk LeisureCraft Baltic Plunge
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Saunakivi (IPORA LLC) a commission. It costs you nothing extra, and it never changes the specifications we list.
SaunaLife Model S1 Soak Series
Paid links · how this works
See it at SaunaLife: Model S1 Soak Series
SaunaLife's own page for the Model S1 Soak Series. Not a paid link.
Where the published figures differ
- Outside dimensions: Baltic Plunge: Exterior Diameter 37.5″ 95 cm Exterior Height 43.75″ 110 cm. Model S1 Soak Series: 40" Diameter x 41.3".
- Inside dimensions: Baltic Plunge: Interior Diameter 32″ 81 cm Interior Height 40.75″ 104 cm. Model S1 Soak Series: 34.4” Diameter x 36” Deep.
- Assembly: Baltic Plunge: shipped assembled. Model S1 Soak Series: Arrives fully assembled.
- Material: Baltic Plunge: The tub is made with a plastic HDPE liner and stainless steel bands on the outside. Model S1 Soak Series: Thick contoured fiberglass lining; Thermo-Pine materials.
- Water capacity: Baltic Plunge: Interior Volume 132 Gallons 501 Litres. Model S1 Soak Series: 124 Gallon water capacity.
- Warranty: Baltic Plunge: All cold plunge packages come with a 5-year warranty (not including chiller). Model S1 Soak Series: service for two years for residential applications after delivery to the original retail purchaser.
Figures we cite for only one of the two: weight (only SaunaLife's cited pages give it). Ask the other maker before treating the two as equal on those points.
Read each one in full
Dundalk LeisureCraft Baltic Plunge
Dundalk LeisureCraft · cold plunge tub without a chiller · 132 gallons · for outdoor use
SaunaLife Model S1 Soak Series
SaunaLife · cold plunge tub without a chiller · 124 gallons · for outdoor use
Sources
- Baltic Plunge - Dundalk LeisureCraft — Dundalk LeisureCraft
- Model S1 Soak Series - SaunaLife — SaunaLife
- SaunaLife: Soak Series S1 Installation Manual REV1.0 01 25 (PDF) — SaunaLife
- SaunaLife: SaunaLife Warranty (PDF) — SaunaLife
- SaunaLife: immersion tubs — SaunaLife