Rated by Amerec for a bigger room: Amerec AK6
Amerec lists for the AK6: Steam Room Cu Ft: Min 80, Max 150. For the AK4.5: Steam Room Cu Ft: Min 60, Max 90.
A steam generator from Amerec, rated by the maker for 60–90 cu ft. Every figure below is Amerec's own, linked to where it is published. Amerec's published list price: $2,945 (steam builder on amerec.com, 29 Sep 2026).
See it at AmerecAs published by Amerec, read on 2026-09-29. Makers revise their products; check Amerec's current specification before you buy. Each maker states its own sizing rule, if any; read it on the product page.
Amerec lists for the AK6: Steam Room Cu Ft: Min 80, Max 150. For the AK4.5: Steam Room Cu Ft: Min 60, Max 90.
Delta publishes a list price of $2,822; Amerec publishes $2,945 for the AK4.5. Each product page names where its figure is published.
Side by side with the Mr. Steam MS150R. These steam generators carry room-size ratings that overlap, as their makers state them before each maker's own sizing rule.
Side by side with the Mr. Steam MS90R. Both are steam generators, and the room sizes their makers state, before each maker's own sizing rule, overlap.
Side by side with the ThermaSol PRO Series III 84. Both are steam generators whose stated room-size ratings overlap, read before each maker's own sizing rule.
Amerec · steam generator · 6 kW · rated by the maker for 80–150 cu ft
Amerec · steam generator · 7.5 kW · rated by the maker for 100–200 cu ft
Amerec · steam generator · 9 kW · rated by the maker for 150–300 cu ft
Amerec · steam generator · 11 kW · rated by the maker for 200–400 cu ft
Amerec · steam generator · 14 kW · rated by the maker for 350–550 cu ft
Mr. Steam · steam generator · 5 kW · rated by the maker for up to 71 cu ft
Amerec lists: Steam Room Cu Ft: Min 60, Max 90. Each maker states its own sizing rule, if any; read it on the product page.
Source: Amerec: Amerec AK Steam Generator with K2 and K3 (PDF)
Amerec says: For rooms made of natural stone, multiply the cubic volume by 1.75 (stone requires more power to heat).
Source: Amerec: Amerec AK Steam Generator with K2 and K3 (PDF)
Amerec lists: Watts: 4500 (240 V); 4500 (208 V).
Source: Amerec: Amerec AK Steam Generator with K2 and K3 (PDF)
Amerec lists: 240 and 208 volt models can be wired in the field for 1 or 3 phase power. Have a licensed electrician confirm your circuit against the installation manual before you buy. Related question: Which steam generators run on a 240 V circuit?
Source: Amerec: Amerec AK Steam Generator with K2 and K3 (PDF)
Amerec lists: 240 V: 1 Phase Amps 19, Breaker 30; 3 Phase Amps 11, Breaker 15. 208 V: 1 Phase Amps 22, Breaker 30; 3 Phase Amps 12, Breaker 20. The installation manual and a licensed electrician have the final word.
Source: Amerec: Amerec AK Steam Generator with K2 and K3 (PDF)
Amerec lists: 1 Control Required, additional may be connected. Compatible with the K2, K3, KT3, K4 controls.
Amerec lists: Amerec’s ADK auto drain option is highly recommended to automatically drain and flush the generator after every steam bath; If you do not buy the auto drain, your tank will need to be flushed monthly, or more often, depending on local water conditions. Related question: Which steam generators drain or flush themselves?
Source: Amerec: faq
Amerec lists: Water Inlet – 3/8” NPT; Pressure Relief Valve – 3/4” NPT; Steam Outlet – 1/2” NPT; Drain Outlet – 3/4” NPT. A licensed plumber should confirm them against the installation manual.
Source: Amerec: Amerec AK Steam Generator with K2 and K3 (PDF)
Amerec lists: 16-1/2" x 6-1/4" x 15".
Amerec lists: Limited Lifetime Warranty; all component parts for five years from the date of installation.
Source: Amerec: warranty
Amerec states: ETL Listed for USA and Canada.
Amerec's own site showed $2,945 (steam builder on amerec.com, 29 Sep 2026). That is the maker's price, not a retailer's or Amazon's; prices change, and the seller's page shows the current one. Related question: How much does a steam generator cost?
Source: Amerec: steam builder
More from Amerec: all Amerec products on Saunakivi.